Nortel Communication Server 1000 Fundamentals page 86

86 Installation and configuration
SET ALARM (S A)
This command configures two properties of MCR's alarm system:
1.
the number of errors the system will allow before signaling an alarm
— threshold
2.
the length of time that MCR will signal the alarm — duration
The command's display is similar to
(page
Figure 35
SET ALARM (S A) screen
SET CONFIG (S C)
This command equips or unequips the T1 carriers. Its display is similar to
Figure 36 "SET CONFIG (S C) screen" (page
Figure 36
SET CONFIG (S C) screen
SET DATE (S D)
This command configures the date kept at the near end of the system. Its
display is similar to
86).
Figure 37 "SET DATE (S D) screen" (page
Nortel Communication Server 1000
Mini-Carrier Remote Fundamentals
NN43001-557 04.01 4 June 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
Figure 35 "SET ALARM (S A) screen"
86).
87).