Floppy Drive Swapping; System Boot-Up Sequence; Password Checking; Cache Memory - AOpen AP55CS User Manual

AMI BIOS

Floppy Drive Swapping

This parameter allows you to swap floppy drives. For example, if you
have two floppy drives (A and B), you can assign the first drive as
drive B and the second drive as drive A or vice-versa. Disable the
parameter to bypass the function. The default is
Disabled.

System Boot-up Sequence

The settings are C:, A: and A:, C: to specify the system search
sequence. The default setting is
A:,C:.

Password Checking

The settings are Setup and Always. The Setup setting allows the
system to boot and use the password only to protect the Setup Utility
Configuration settings from being tampered with. The Always setting
requires you to enter the password everytime you boot the system.
The default setting is Setup .

Cache Memory

Internal Cache
This function lets you enable or disable the internal cache. The
default setting is .
Enabled
External Cache
This parameter lets you enable the external cache and select the
supported cache mode. The available selections are Write back,
Write through and Disabled. The default setting is .
Write back
4-10 User's Guide