Hardware Setup
Installing a SIMM
Observe the ESD precautions when installing
components.
Follow these steps to install a SIMM:
o
1.
Slip a SIMM at a 45
facing down. Always install SIMMs beginning with Bank 0.
Be careful when inserting or removing SIMMs.
Forcing a SIMM in or out of a socket can
damage the socket or the SIMM (or both).
2.
Gently push the SIMM up until the pegs of the socket slip into the holes
on the SIMM and the holding clips lock the SIMM into a vertical
position.
The SIMM should be at a 90
installed.
2-12
angle into a socket with the component side
o
angle when
User 's Guide