Ncr Scsi Bios And Drivers - AOpen AP55CS User Manual

NCR SCSI BIOS and Drivers

The NCR 53C810 SCSI BIOS resides on the same flash memory
chip as the system BIOS. To use the onboard NCR BIOS, you need
to install an NCR 53C810 SCSI controller card in your system.
All SCSI devices that you install in your system require software
drivers. The NCR SCSI BIOS directly supports SCSI hard disks
under DOS, Windows and OS/2. It also uses DOS-format and SCO
UNIX-format support floppy disk device drivers that come with the
NCR 53C810 SCSI controller card. The DOS-format device drivers
are for SCSI devices used with DOS, Windows NT, Novell NetWare
and OS/2. The SCO UNIX-format device drivers are for SCSI
devices used with SCO UNIX.
performance than the direct BIOS support.
To use the device drivers, you must install them in your system hard
disk drive and add them to your system configuration files.
detailed installation instructions, see the README files that come
with the drivers.
The system board also supports the AMI
Flash Memory Writer Utility that allows
you to upgrade the system BIOS.
more information on this utility, contact
your local distributor.
User's Guide
AMI BIOS
These drivers offer higher
For
For
4-43