AMI BIOS
Power Management/APM
Set this parameter to
to take advantage of the power-
Enabled
saving feature. Disable the parameter to bypass the feature.
Standby Timeout
This function lets you set when to put the system into standby mode.
In standby mode, the CPU clock slows down. Any event detected
returns the system to full power. The settings are 10 sec, 30 sec, 1
min, 5 min, 10 min, 20 min, 30 min and Disabled.
Suspend Timeout
This function lets you set when to put the system into suspend mode.
In suspend mode, the CPU clock stops. Any event detected returns
the system to full power. The settings are 10 sec, 30 sec, 1 min, 5
min, 10 min, 20 min, 30 min and Disabled.
4-28
User's Guide