Table of Contents
Advertisement
AMI BIOS
System Keyboard
Set this parameter to
Present
the system.
However, some servers may not have keyboards.
Select
Absent
if there is no keyboard present.
Primary Display
This function detects the type of VGA in use.
VGA/EGA, CGA 40 x 25, CGA 80 x 25, Mono , and Absent
default setting is
VGA/EGA
Above 1 MB Memory Test
This parameter allows your system to check all available memory.
Therefore, setting this parameter to
power-on self-test. The default setting is
Memory Test Tick Sound
Enabling this parameter lets you hear the tick sound during the
memory test. Disable the parameter to bypass the function. The
default setting is
Enabled
Parity Error Check
You must set this parameter to
parity in your system. Disable the parameter if the SIMMs in use are
without parity. Since the DRAM can still operate even without using
the parity scheme for SIMMs with parity, this function is normally set
to
Disabled
.
4-8
if there is a keyboard connected to
.
Enabled
Disabled
.
if you install SIMMs with
Enabled
The settings are
The
.
slows down the
.
User's Guide
Advertisement
Table of Contents
