Table of Contents
Advertisement
AMI BIOS
Default Setup
Select this option to automatically set your system configuration
parameters. To select, highlight
and press e .
Default
Original
This option loads the values that you saved before shutting off the
system. The following prompt appears if you choose
Original
from the Default Setup menu .
Select
Yes
to load the original
values.
Optimal
Choose this option and the BIOS configures the system using the
best-case values to optimize system performance. However, these
values may not be applicable to your system. If your system does
not boot after choosing this setting, reconfigure it using the Fail-safe
settings. Refer to the following section.
The screen below appears if you choose
from the Default
Optimal
Setup menu. Select
Yes
to load the optimum values.
User's Guide
4-37
Advertisement
Table of Contents
