Table of Contents
Advertisement
AMI BIOS
PCI Timing
CPU-to-PCI Post Write
Enable this parameter to control the posting of the CPU-to-memory
write data in the posting buffers. Disable the parameter to deactivate
the buffering function. The default is
CPU-to-PCI Burst Write
Enabling this parameter allows the translation of the host cycles into
memory-burst cycles and controls the memory-burst-write cycles.
Disabling the function deactivates the memory-burst writes.
default is
Enabled
.
Max. Burst Range in PCI Master
Increasing the burst range improves system performance. However,
the burst range varies depending on the SIMM configuration type that
the system supports.
The available settings for this parameter are 256 KB, 512 KB, 1 MB,
2 MB and 4 MB. Select
Select
for single-module support. The default setting is
2 MB
See the section Memory Configurations in
Chapter
configurations supported by the system
board and for detailed information on how
to install a SIMM.
4-26
.
Enabled
4 MB
if you want to install SIMMs in pairs.
2
for
the
list
The
.
2 MB
of
SIMM
User's Guide
Advertisement
Table of Contents
