Table of Contents
Advertisement
This chapter tells how to set jumpers, upgrade system memory, add
expansion boards, and install the system board.
Install the CPU, memory, and set the jumpers before you install the system
board inside a system housing. You may add the other components after
installing the board. Read this chapter to learn about the components before
you install them.
ESD Precautions
Electrostatic discharge (ESD) can damage your processor, disk drives,
expansion boards, and other components. Always observe the following
precautions before you install a system component.
1.
Do not remove a component from its protective packaging until you are
ready to install it.
2.
Wear a wrist grounding strap and attach it to a metal part of the system
unit before handling components. If a wrist strap is not available,
maintain contact with the system unit throughout any procedure
requiring ESD protection.
User 's Guide
Hardware Setup2
Chapter
2-1
Advertisement
Table of Contents
