Programming Mode; Onboard Fdc; Serial Port 1; Serial Port 2 - AOpen AP55CS User Manual

AMI BIOS

Programming Mode

The settings for this option are Auto and Manual. The Manual setting
allows you to set up the screen items manually. The Auto setting
sets up all the items automatically except for the Parallel Port Mode
parameter. The default is
Auto.

Onboard FDC

Enabling this function allows you to use the onboard floppy disk
controller (FDC). The default setting is .
Enabled

Serial Port 1

This parameter allows you to set the base address of serial port 1.
The available settings are 3F8H, 2F8H, 3E8H, 2E8H and Disabled.

Serial Port 2

This parameter allows you to set the base address of serial port 2.
The available settings are 3F8H, 2F8H, 3E8H, 2E8H and Disabled.

Parallel Port

This parameter allows you to set the base address of the parallel
port. The available settings are 3BCH, 378H, 278H and Disabled.
User's Guide 4-33