Usb Device; Floppy Drive - AOpen MX64 User Manual

2.3.6 Printer
The onboard printer connector is a 25-pin D-type connector marked PRINTER.
The view angle of the drawing shown here is from the back panel of the
housing.

2.3.7 USB Device

You can attach USB devices to the USB connector. The motherboard
contains two USB connectors, which are marked as USB.

2.3.8 Floppy Drive

Connect the 34-pin floppy drive cable to the floppy drive connector marked as
FDC on the system board.
Hardware Installation
USB
2
1
FDC
PRINTER
PCB
PCB
34
33
2-11