Table of Contents
Advertisement
AMI BIOS
ISA Memory Block Size
If you enable the ISA Memory Block Base parameter, then you need
to specify the memory size that you want to reserve for your ISA
cards. This parameter allows you to set the memory size for ISA
card functions. The selections are 8 KB, 16 KB, 32 KB and 64 KB.
Boot to PnP Operating System
This parameter is normally set to
No
. Set it to
Yes
only if you have
Windows 95 installed in your system.
Chipset Setup Mode
This function allows you to change the Chipset Setup DRAM control
parameters according to the end-user type. The available settings
are End-user and Engineer. We recommend that you select
End-
.
See the following section for more details on Chipset
user
Features Setup.
User's Guide
4-19
Advertisement
Table of Contents
