Table of Contents
Advertisement
AMI BIOS
The F000 and E000 addresses are
exclusively shadowed for BIOS.
IDE
IDE Boot-up Detection
There are cases wherein the HDD parameters that you entered and
those detected by the auto-detection function are mismatched. This
causes the system not to boot. If this happens, we recommend that
you set this parameter to
function. The default setting is
Onboard PCI IDE
You may enable or disable the onboard PCI IDE through this
parameter. The available settings are Disabled, Both, Primary and
Secondary. Select
Primary
the primary controller.
secondary controller. Select
and secondary controller.
function. The default setting is
Enabling this parameter increases the IDE hard disk data transfer
rate to further improve system performance. However, not all hard
disks support this feature.
parameter is
Disabled
4-12
to bypass the auto-detection
Disabled
Disabled
.
if your onboard PCI IDE functions as
Select
Secondary
Both
if it functions both as a primary
Select
Disabled
.
Both
IDE PREFETCH
Therefore, the default setting for this
.
if it functions as a
to disregard the
User's Guide
Advertisement
Table of Contents
