Table of Contents
Advertisement
AMI BIOS
Offboard (Add-on) PCI IDE
The onboard PCI slots allow you to install expansion cards into your
system. If you install a PCI add-on card, you need to specify the slot
that it occupies. The selections are Slot 1, Slot 2, Slot 3 and Absent.
If the PCI slots are vacant, the parameter is automatically set to
Absent
.
PRIMARY INT# LINE
This parameter lets you assign an INT for the IDE device connected
to your primary IDE connector. The settings are INT A, INT B, INT
C, INT D, Absent and Not Used. If you do not have a PCI-IDE card
installed in your system and your Offboard (Add-on) PCI IDE
parameter is set to Absent, this parameter becomes non-
configurable.
SECONDARY INT# LINE
This parameter lets you assign an INT for the IDE device connected
to your secondary IDE connector. The settings are INT A, INT B, INT
C, INT D, Absent and Not Used. If you do not have a PCI-IDE card
installed in your system and your Offboard (Add-on) PCI IDE
parameter is set to Absent, this parameter becomes non-
configurable.
User's Guide
4-13
Advertisement
Table of Contents
