Table of Contents
Advertisement
Other housings may have a 12-pin connector. If your housing has this type
of connector, plug it into JP24 as shown in the following figure. Make sure
that the red wire of the connector connects to pin 11.
Turbo Switch
The AP55CS does not support the turbo
function. Therefore, we recommend that you
connect the turbo switch to JP17. Refer to the
Break/Suspend connector section for more
information.
User 's Guide
Hardware Setup
Ground
Reset
Res-VCC
Speaker
Break Switch
( Turbo Switch )
Ground
Keylock
Ground
VCC
2-15
Advertisement
Table of Contents
