Table of Contents
Advertisement
Hardware Setup
Fan Connector
The two-pin fan connector is marked J7 on the system board. To connect,
plug the connector to its corresponding pin as shown in the following figure.
+12V
Gnd
GND
Two-pin fan connector
2-pin fan power connector (J2)
VGA Connector
The VGA connector marked J3 onboard is different from the VGA
connectors that you normally find on other system boards. The board comes
with a cable that is designed to link the onboard VGA connector to the VGA
port on the housing. The following figure shows how to insert the cable into
the VGA connector and link it to the VGA port.
User 's Guide
2-17
Advertisement
Table of Contents
