Table of Contents
Advertisement
This feature allows you to use a hard disk with a capacity of higher
than 528 MB.
This is made possible through the Logical Block
Address (LBA) mode translation. Enable the parameter if the hard
disk functioning as secondary master supports this feature.
Secondary Slave
This parameter lets you set the PIO mode that your onboard PCI IDE
functioning as secondary slave supports. The selections are from
Mode 0 to Mode 4, Auto and Disabled. Set this parameter either by
entering the PIO mode manually or selecting
detect the supported PIO mode. Disable the parameter to bypass the
feature. The default setting is
Enabling this feature enhances the performance of the disk
functioning as secondary slave by allowing the data transfer in block
(multiple sectors).
This increases the data transfer rate to 256
bytes/cycle. Disable the parameter to disregard the feature. The
default setting is
Disabled.
This feature allows you to use a hard disk with a capacity of higher
than 528 MB.
This is made possible through the Logical Block
Address (LBA) mode translation. Enable the parameter if the hard
disk functioning as secondary slave supports this feature.
User's Guide
AMI BIOS
LBA MODE
ADVANCED PIO
Auto
Auto.
BLOCK MODE
LBA MODE
to automatically
4-17
Advertisement
Table of Contents
