Hardware Setup; Esd Precautions - AOpen AP5C User Manual

This chapter tells how to set jumpers, upgrade system memory, add
expansion boards, and install the system board.
Install the CPU, memory, and set the jumpers before you install the
system board inside a system housing.
components after installing the board. Read this chapter to learn
about the components before you install them.

ESD Precautions

Electrostatic discharge (ESD) can damage your CPU, disk drives,
expansion boards, and other components.
following precautions before you install a system component.
1. Do not remove a component from its protective packaging until
you are ready to install it.
2. Wear a wrist grounding strap and attach it to a metal part of the
system unit before handling components. If a wrist strap is not
available, maintain contact with the system unit throughout any
procedure requiring ESD protection.
User's Guide

Hardware Setup

You may add the other
Always observe the
Chapter
2
2-1