Mercedes-Benz CLK-Class Owner's Manual page 69

Safety
Occupant safety
G
Risk of injury
If the child restraint system has not been fit-
ted correctly to a suitable vehicle seat, the
child cannot be restrained in the event of an
accident or sudden braking and could there-
fore be seriously or fatally injured.
For this reason, observe the installation
instructions issued by the child restraint
system manufacturer when fitting the child
restraint system.
Make sure that:
the securing rings are locked in position
before the seat is fitted
the child seat is locked into place in the
securing rings on the left and right once
it has been installed
For this reason, do not place objects (e.g. a
cushion) underneath the child restraint sys-
tem. The entire base of the child restraint
system must be in contact with the seat sur-
face at all times.
On the rear seats, only use child restraint
systems with an ISOFIX child seat securing
system* that have been recommended by
Mercedes-Benz.
66
G
Risk of injury
If the child restraint system or its securing
system, e.g. ISOFIX child seat securing sys-
tem, has been damaged or subjected to a
load in an accident, the child secured in it
could be seriously or fatally injured in the
event of an accident, braking or a sudden
change in direction.
For this reason, have child restraint systems
and their mountings that are damaged or
have been subjected to a load in an accident
checked immediately, and replaced if nec-
essary, at a qualified specialist workshop
which has the necessary specialist knowl-
edge and tools to carry out the work
required. Mercedes-Benz recommends that
you use a Mercedes-Benz Service Centre for
this purpose. In particular, work relevant to
safety or on safety-related systems must be
carried out at a qualified specialist work-
shop.
P91.20-2071-31
1 Securing ring
2 Release button
Installing
Fold securing rings 1 upwards until
they engage.
Fit the child seat – see the separate
child seat manufacturer's installation
instructions.