Mercedes-Benz CLK-Class Owner's Manual page 417

Technical data
Service products and capacities
Engine oil
The following values indicate the various
total engine capacities.
Engine with oil filter CLK 200
KOMPRESSOR
Replacement
amount
You may use any passenger-vehicle
engine oil which has been tested and ap-
proved for Mercedes-Benz. A list of tested
and approved oils is available from any
Mercedes-Benz Service Centre. Some oil
containers may also be marked "Approved
in accordance with MB Sheet 229.1, 229.3
or 229.5", for example.
The Mercedes-Benz Specifications for
Service Products Sheets 229.1, 229.3 and
229.5 apply to:
CLK 240
CLK 320
CLK 500
CLK 55 AMG
CLK 270 CDI
414
CLK 200 CGI
5.5 l 5.5 l
The Mercedes-Benz Specifications for
Service Products Sheets 229.3, and 229.5
apply to:
CLK 200 Kompressor
CLK 200 CGI
CLK 500
CLK 55 AMG
!
Do not use lubricant additives. They could
lead to increased wear of and damage to the as-
semblies. If you use fuel additives, your warranty
entitlement will be restricted.
CLK 240 CLK 320
8.0 l 8.0 l
CLK 500 CLK 55 AMG CLK 270 CDI
7.5 l 8.5 l
Engine oil viscosity
Select the SAE class (viscosity) of the en-
gine oil according to the average seasonal
ambient temperature, using the following
overview as a guide.
The temperature limits shown are guide-
lines only, and small deviations either way
are permitted.
6.5 l