Mercedes-Benz CLK-Class Owner's Manual page 162

Controlling the airflow manually
You can set the airflow to six different lev-
els automatically ( page 157) or manually
using control 1.
Press the U button.
The indicator lamp in the U button
goes out. Automatic airflow control is
switched off. The airflow is controlled
according to the setting currently
selected.
Turn the airflow control to the desired
setting.
The airflow is controlled according to
the setting selected.
Demist button
The following settings can be used to clear
the windscreen, e.g. if it is covered with
frost.
Switching on
Press the P button.
The indicator lamp in the P button
lights up.
Thermatic switches automatically to
the following functions:
Maximum blower and heat output
Air is directed towards the wind-
screen and front side windows
Air-recirculation mode is switched
off
i
This setting should only be maintained until
the windscreen is clear again.
Switching off
Press the P button again.
The indicator lamp in the P button
goes out.
Controls in detail
Thermatic (automatic air conditioning)
Misted up windows
Windows misted up on the inside
If the blower is switched off and air-recir-
culation mode is switched on, the vehicle
interior will no longer be ventilated and the
windows could mist up.
Press the P button.
The indicator lamp in the P button
lights up.
Thermatic switches automatically to
the following functions:
Maximum blower and heat output
Air is directed towards the wind-
screen and front side windows
Air-recirculation mode is switched
off
i
This setting should only be maintained until
the windscreen is clear again.
159