Mercedes-Benz CLK-Class Owner's Manual page 136

Telephone* menu
You can operate your telephone using the
functions in the menu, provided it is
TEL
connected to the Mercedes-Benz hands-
free system and is switched on.
Switch on the telephone and
COMAND* system or the audio sys-
tem. For notes on how to do this, see
the separate Operating Instructions.
Press the ÿ or è button on the
steering wheel repeatedly until you see
the menu in the display.
TEL
You will see different messages in the dis-
play, depending on the status of the tele-
phone:
If the telephone is switched off and:
there is an audio system installed,
the message appears in
TEL OFF
the display
there is a COMAND* system
installed, the
TEL OFF
appears in the display
If you have not yet entered a PIN and:
there is an audio system installed,
the
TEL PIN
display
there is a COMAND* system
installed, the
sage appears in the display
Enter the PIN using the telephone,
Linguatronic* or the COMAND*
system.
The telephone searches for a net-
work. The display remains empty
during this time.
As soon as the telephone has found a
network, this is reported in the display.
P54.30-5234-31
message
Audio system display
1 Network provider
2 Signal strength
message appears in the
mes-
Tel. Enter PIN
COMAND* system display
1 Network provider
2 Signal strength
Once it has shown its operational readi-
ness, you can operate the telephone using
the operating system.
i
out, your vehicle is currently outside the trans-
mitter or receiver range.
Controls in detail
Operating system
P54.30-5235-31
If the operational readiness symbol goes
133