11.2 Specifications of the GM1 Controller
Item
Surge absorber
Short-circuit protection
Input points per common
Operating mode indicator
External connection method
(Note 1)
When the maximum inrush current is exceeded, eight output points in the same protection block are
turned OFF simultaneously.
■
Internal circuit diagram of the GM1 Controller (sink type) output section
■
Limitations on the number of simultaneous output ON points of the GM1
Controller (Sink Type)
11.2.4 Output Specifications of the GM1 Controller (Source Type)
■
Output specifications (source type) (EtherCAT-compatible GM1 Controller only)
Item
Insulation method
Output type
Rated load voltage
11-6
Specifications
Current
35 mA/common (at 24 V)
Zener diode
Provided (to automatically protect every eight points)
16 points/1 common
16-point LED display (Lit when ON, SW selection)
Connector connection (Compliant with the MIL standard, 40P)
Specifications
Optical coupler
PNP open collector
24 V DC
(Note 1)
WUME-GM1H-02