Panasonic GM1 Series Reference Manual page 102

11.3 Specifications of Expansion Units
Item
ON state max. voltage
drop
Response
time
External
power
supply
Surge absorber
Short-circuit protection
Input points per common
Operating mode indicator
External connection method
■
Internal circuit diagram of the 64-point digital I/O unit (source type)
Input section (32 points)
Output section (32 points)
■
Limitations on the load current of the 64-point digital I/O unit (source type)
The load current is limited as shown in the following figure depending on the voltage of the
external power supply.
11-16
Specifications
0.5 V or less
OFF→ON 0.1 ms or less (Load current: 2 mA or more)
ON→OFF 0.5 ms or less (Load current: 2 mA or more)
Voltage 4.75 to 26.4 V DC
Current 90 mA/common (at 24 V)
Zener diode
None
32 points/1 common
32-point LED display (Lit when ON, selection using the display selector
switch)
Connector connection (Compliant with the MIL standard, 40P, two pieces
used)
WUME-GM1H-02