Panasonic GM1 Series Reference Manual page 93

Item
Allowable load voltage range
Max. load current
Max. inrush current
OFF state leakage current
ON state max. voltage drop
Response time
External power
supply
Surge absorber
Short-circuit protection
Input points per common
Operating mode indicator
External connection method
(Note 1) When the maximum inrush current is exceeded, eight output points in the same protection block are
turned OFF simultaneously.
■
Internal circuit diagram of the GM1 Controller Output section
■
Limitations on the number of simultaneous output ON points of the GM1
Controller
WUME-GM1H-02
Specifications
21.6 to 26.4 V DC
0.3 A
1.0 A
2 µA or less
0.7 V or less
OFF→ON 6 µs or less (at an ambient temperature of 25°C)
ON→OFF 15 µs or less (at an ambient temperature of 25°C)
Voltage 21.6 to 26.4 V DC
Current 30 mA/common (at 24 V)
Zener diode
Provided (to automatically protect every eight points)
16 points/1 common
16-point LED display (Lit when ON, SW selection)
Connector connection (Compliant with the MIL standard, 40P)
11.2 Specifications of the GM1 Controller
(Note 1)
11-7