Chapter 7 Network Function; Ip Address Setting; Setting An Ip Address [G] [Wg]; Setting An Ip Address [A] - Mitsubishi Electric MELSERVO-J5 Series User Manual
Ac servo system
Hide thumbs
Also See for MELSERVO-J5 Series:
- User manual (580 pages) ,
- Sample screen manual (128 pages) ,
- Quick connection manual (64 pages)
Table of Contents
Advertisement
7
NETWORK FUNCTION
The function explained in this chapter is available for the following servo amplifiers.
• MR-J5-_A(-RJ)
• MR-J5-_G(-RJ)
• MR-J5W_-_G
This is a function that uses an Ethernet communication to access servo amplifiers remotely. The network function of the servo
amplifier is as follows.
Function
FTP server function
Precautions
• To ensure the safety of the system against unauthorized network access, take security measures such as using a firewall.
• For CC-Link IE TSN, the servo amplifier communication speed is set to 1 Gbps from the factory. To change the
communication speed, use [Pr. NPA12 Communication speed].
7.1
IP address setting
Setting an IP address [G] [WG]
Refer to "IP address setting function" in the following manual.
MR-J5-G/MR-J5W-G User's Manual (Communication Function)
Setting an IP address [A]
Set an IP address with [Pr. NPA02 IP address]. After setting the parameter, cycle the power to apply the settings. The table
shows the initial values.
Network parameter
[Pr. NPA02 IP address]
[Pr. NPA04 Subnet mask]
7.2
Managing accounts
To use the network function, set an account. Accounts can be set with the following network parameters. Up to 8 accounts can
be set.
Account
User information No. 1
User information No. 2
User information No. 3
User information No. 4
User information No. 5
User information No. 6
User information No. 7
User information No. 8
The following account is set from the factory.
Network parameter
[Pr. NPB04 User name No. 1]
[Pr. NPB05 Authorization level No.1]
[Pr. NPB06 Password No. 1]
Description
This function enables file transfer with the servo amplifier.
It is available on servo amplifiers with firmware version A5 or later.
Initial value
192.168.3.1
255.255.255.0
User name
[Pr. NPB04]
[Pr. NPB07]
[Pr. NPB10]
[Pr. NPB13]
[Pr. NPB16]
[Pr. NPB19]
[Pr. NPB22]
[Pr. NPB25]
Initial value
user
00000001h
user
Authorization level
[Pr. NPB05]
[Pr. NPB08]
[Pr. NPB11]
[Pr. NPB14]
[Pr. NPB17]
[Pr. NPB20]
[Pr. NPB23]
[Pr. NPB26]
Password
[Pr. NPB06]
[Pr. NPB09]
[Pr. NPB12]
[Pr. NPB15]
[Pr. NPB18]
[Pr. NPB21]
[Pr. NPB24]
[Pr. NPB27]
7 NETWORK FUNCTION
391
7.1 IP address setting
7
Advertisement
Table of Contents
