Table of Contents
Advertisement
Figure 48
1. Fuel lter
2. Sensor wire
3. Drain plug
Priming the Fuel System
The primer pump is the gold metal button on top
of the fuel filter (Figure 49).
To bleed air from the fuel system, push down on
the primer pump until resistance becomes firm.
This should take about 10-15 pushes on the primer
pump.
Figure 49
1. Fuel lter
Servicing the Fuel Tank
Do not attempt to drain the fuel tank. Ensure that
an Authorized Service Dealer drains the fuel tank
and services any components of the fuel system.
4. O-ring
5. Metal primer button
2. Gold metal primer pump
Electrical System
Maintenance
Servicing the Battery
Warning
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and reproductive
harm. Wash hands after handling.
Battery electrolyte contains sulfuric acid
which is a deadly poison and causes severe
burns.
Do not drink electrolyte and avoid contact
with skin, eyes or clothing. Wear safety
glasses to shield your eyes and rubber gloves
to protect your hands.
Removing the Battery
Battery terminals or metal tools could short
against metal machine components causing
sparks. Sparks can cause the battery gasses
to explode, resulting in personal injury.
• When removing or installing the battery,
do not allow the battery terminals to
touch any metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of
the machine.
42
Advertisement
Table of Contents
