Spirit CT 900 LED User Manual page 47

Step 4:
1. Attach LEFT OUTER HANDRAIL COVER (48)
to MAIN PANEL using 2 SCREWS (83) and 2
FLAT WASHERS (75).
2. Attach LEFT INNER HANDRAIL COVER (47)
to MAIN PANEL using 5 SCREWS (83).
3. Attach LEFT LOWER UPRIGHT COVER (40)
to MAIN FRAME (1) using 2 SCREWS (83),
2 FLAT WASHERS (75), and 1 long
SCREW (69).
4. Attach LEFT END CAP (42) to MAIN FRAME (1)
using 2 SCREWS (68).
5. Repeat to install right side covers (45, 46, 39, 41).
6. Reinstall the MOTOR COVER (37) using
the bolts removed in Step 1.
ATTENTION!
Make sure all screws are all firmly tightened after all parts have been installed.
47