Lenovo ThinkSystem SR670 V2 Maintenance Manual page 270

After you finish
1. Install a replacement unit or a slot bracket. See "Install a GPU adapter link bridge" on page 262.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a GPU adapter link bridge
Follow instructions in this section to install a GPU adapter link bridge.
About this task
Attention:
• Read "Installation Guidelines" on page 121 and "Safety inspection checklist" on page 122 to ensure that
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
• Depending on the specific type, your GPU adapter might look slightly different from the illustrations in this
section.
• Follow the additional instructions in any documentation that comes with your GPU adapter.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku:
https://list.youku.com/albumlist/show/id_59636529
Procedure
Notes: Install the GPU adapter link bridge to connect the GPU pairs listed below:
• GPU 1 and GPU 2
• GPU 3 and GPU 4
• GPU 5 and GPU 6
• GPU 7 and GPU 8
Step 1. If the GPU is installed in the chassis, remove it from the chassis. See "Remove a GPU adapter" on
page 250.
Step 2. Remove the link connector cover from the GPU.
ThinkSystem SR670 V2 Maintenance Manual
262