Table of Contents
Advertisement
Figure 142. PHM components
Heat sink
1
Processor identification label
2
Heat sink triangular mark
3
Nut and wire bail retainer
4
Torx T30 nut
5
Anti-tilt wire bail
6
Processor carrier
7
Clips to secure carrier to heat sink
8
Note: The heat sink, processor, and processor carrier for your system might be different from those shown
in the illustrations.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku:
https://list.youku.com/albumlist/show/id_59636529
Procedure
Step 1.
Prepare your sever.
a.
Remove the top cover. See "Remove the top cover" on page 225.
b.
Remove the air baffle. See "Remove the air baffle" on page 133.
ThinkSystem SR670 V2 Maintenance Manual
202
Clips to secure processor in carrier
9
Carrier triangular mark
10
Processor ejector handle
11
Processor heat spreader
12
Thermal grease
13
Processor contacts
14
Processor triangular mark
15
Advertisement
Table of Contents
