Table of Contents
Advertisement
Figure 148. Processor carrier installation
Step 4.
Apply thermal grease.
a.
Carefully place the processor and carrier in the shipping tray with the processor-contact side
down. Make sure the triangular mark on the carrier is aligned with the triangular mark in the
shipping tray.
b.
If there is any old thermal grease on the processor, gently wipe the top of the processor with
an alcohol cleaning pad.
Note: Make sure the alcohol has fully evaporated before applying new thermal grease.
c.
Apply the thermal grease on the top of the processor with syringe by forming four uniformly
spaced dots, while each dot consists of about 0.1 ml of thermal grease.
Figure 149. Thermal grease application with processor in shipping tray
Step 5.
Assemble the processor and heat sink.
a.
Align the triangular mark on the processor carrier and processor with the triangular mark or
notched corner on the heat sink.
b.
Install the heat sink onto the processor carrier.
ThinkSystem SR670 V2 Maintenance Manual
210
Advertisement
Table of Contents
