Table of Contents
Advertisement
Notes: See the following links to learn how to download and use impctl in different operating
systems:
• Windows: https://datacentersupport.lenovo.com/us/en/videos/YTV101407
• Linux: https://datacentersupport.lenovo.com/us/en/solutions/HT508642
5. Reboot the system.
Step 2.
Prepare your server.
a.
Remove the top cover. See "Remove the top cover" on page 225.
b.
Remove the air baffle. See "Remove the air baffle" on page 133.
Step 3.
Touch the static-protective package that contains the memory module to any unpainted surface on
the outside of the server. Then, take the memory module out of the package and place it on a
static-protective surface.
Step 4.
Locate the required memory module slot on the system board.
Note:
• Remove or install memory modules for one processor at a time.
• Ensure that you observe the installation rules and sequence order in "Memory module
installation rules and order" in the ThinkSystem SR670 V2 Setup Guide.
Figure 117. Location of memory module slots and processor sockets
.
Chapter 4
Hardware replacement procedures
177
Advertisement
Table of Contents
