Table of Contents
Advertisement
• Depending on the specific type, your GPU adapter might look slightly different from the illustrations in this
section.
• Follow the additional instructions in any documentation that comes with your GPU adapter.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-BXei6L6c05osQVLt4w5XYx
• Youku:
https://list.youku.com/albumlist/show/id_59636529
Procedure
Step 1.
Prepare your server.
a.
Remove the top cover. See "Remove the top cover" on page 225.
Step 2.
Remove the GPU adapter link bridge from the GPUs with a suction cup.
a.
Press the suction cup against the GPU adapter link bridge until it adheres to the GPU
adapter link bridge.
b.
Pull up the suction cup and remove the GPU adapter link bridge together with the suction
cup from the GPUs.
Note: Depending on the configuration, there may be one or three GPU adapter link bridges on
the GPU. Remove all GPU adapter link bridge from the GPUs.
Figure 194. Removing the GPU adapter link bridge
.
Chapter 4
Hardware replacement procedures
261
Advertisement
Table of Contents
