Setup Menu - Epson EPL-N2000 User Manual

* You can also change these settings using OneTouch modes; see
page 3-5.
** Increasing the print density increases toner consumption. If you select darker
print, you may need to replace the imaging cartridge more often.
*** Changing the Page Protect setting reconfigures your printer memory and
may erase any downloaded fonts.

Setup Menu

The Setup menu items allow you to customize various printer
modes, select a control panel language, check the total pages
printed to date, and check or reset the toner counter.
Setup menu items
Menu item
Interface
Time Out
Standby
Lang
Printer Name
Description
Sets whether the printer can receive data through all
available interfaces (Auto) or only one of these:
Parallel B, Parallel C, Serial, L/T, AUX.
Sets the amount of time the printer waits to receive
data before terminating an incomplete print job.
After the time-out period, it searches for new data on
another interface channel. Various settings are
available between 5 to 300 seconds; default is 60.
Turns standby mode on (or off) to reduce power used
by the fixing heater when the printer is not used for 60
minutes. It warms up in about 70 seconds when a
print job is received; default is Enabled.
Selects the language used for control panel display
messages and the status sheet: English, French,
German, Italian, Spanish, Swedish, Danish, Dutch,
Finnish, Portuguese.
Displays the printer name instead of Ready when the
printer is standing by; default is OFF.
Using the Control Panel 3-15