1239X Menu - Epson EPL-N2000 User Manual

ESCP2 and FX menu items (continued)
AutoLF
Bit Image
ZeroChar

1239X Menu

Use the 1239X menu only if you have selected 1239X as your
Emulation mode in SelecType or the Remote Control Panel
utility.
1239X menu items
Menu item
Font
Pitch
Code Page
T.Margin
Text *
AutoCR
AutoLF
Sets the printer to automatically add or not add a line-
feed after every carriage return; On, Off. (If your text lines
overprint each other, set AutoLF to On.)
Sets the density the printer uses to print bit-mapped
images to either Dark or Light density; or select BarCode to
convert bit-mapped images to barcodes by filling in any
gaps between dots for unbroken barcode lines (reduces
image size and may distort some bit-mapped graphics).
Selects either slashed zero (Ø) or unslashed zero (0) to be
printed for the zero character.
Description
Selects a font by typeface; Courier is the default (see the
Technical Information manual for details on the available
fonts).
Sets the pitch in cpi (characters per inch) for the selected
Font: 10, 12, 15, 17, 20, or 24 cpi, or Proportional.
Sets the number of the character table you want to use;
437 is the default (see the Technical Information manual
for details on the available character tables).
Specifies the margin from the top of the paper to the base
of the first printed line: 0.30 to 1.50 inches; 0.40 inch is the
default.
Sets the page length by the number of lines (1 to 81) in 1/6-
inch increments; 63 lines is the default.
Sets the printer to automatically perform or not perform a
carriagereturn then linefeed operation when the print
position exceeds the right margin; On, Off.
Sets the printer to automatically add or not add (default)
a linefeed after every carriagereturn; On, Off.
Using the Control Panel 3-23