Adjusting The Ritech Setting - Epson EPL-N2000 User Manual

9. Close the top cover.
10. Select Toner Count Clear on the SelecType Setup menu to
reset the toner counter. See Chapter 3 for instructions.

Adjusting the RITech Setting

EPSON's new Resolution Improvement Technology (RITech)
automatically improves the print quality of your lines, text, and
graphics. Most of the time it works behind the scenes to provide
the best printed output. Occasionally, however, you may need to
adjust the RITech setting if you notice a change in quality, such
as after you replace the imaging cartridge.
To determine whether you need to adjust the RITech setting,
print a status sheet using the printer's control panel. Follow the
steps below:
1. Turn on the printer and let it warm up until you see the
Ready message on the control panel display and the
On Line light comes on. (If it doesn't come on, press the
On Line button.)
Note:
Before proceeding, make sure Toner Save Mode is turned off or the
status sheet will not print properly. See Chapter 2 for instructions on
changing the setting using the printer driver. You can also turn it off
using the control panel or the Remote Control Panel utility; see Chapter
3 or the Technical Information manual for more instructions.
Maintenance 5-5