Using Groups Of Settings - Epson EPL-N2000 User Manual

SelecType settings remain in effect until you change them again with the
printer driver or control panel (as described in Chapter 3), even when you
turn off your printer.
** Do not turn Page Protect ON unless your printouts are incomplete and you
have installed additional printer memory (see Chapter 4 for details). When
the setting is changed, downloaded fonts are erased from printer memory,
so change the setting before sending a print job.

Using Groups of Settings

To change all the printer driver settings to their factory defaults,
select Driver default in the bottom right corner of the screen.
Then click OK and print.
You can also create a group of printer driver settings and save
them with a unique group name. Then you need only select the
group name for a particular type of document to make all the
necessary settings, such as envelopes or landscape documents.
Follow these steps:
1. First change the printer driver settings for your document.
The group name in the Default box changes from Driver
default to User Defined .
2. Click the Default box.
3. Erase User Defined and type in a name for the group of
settings, such as Envelopes .
4. Click OK to save your settings under that name and exit the
driver.
5. Print your document.
Whenever you want to print a document with a particular group
of settings, select the group name in the Default box; then click
OK and print. If you need to permanently delete a group of
settings, select the name in the Default box and click the Delete
button. (You cannot delete the Driver defaul t group name.)
Printing With the Windows Printer Drivers 2-13