Epson EPL-N2000 User Manual page 64

You may need to change printer settings before you print,
depending on your output needs. In addition to the basic printer
driver settings described in Chapter 2, check the following:
Driver (plotter selection):
Pen configuration:
Plot origin:
Make sure that Orientation is set to Landscape if you are using
GLlike mode.
If you need to change printer settings, first change the emulation
mode, then change the printer settings using the printer driver,
the Remote Control Panel utility, or SelecType.
GL2 menu items
Menu item
GL Mode
Scale
Origin
Pen
End
Join
3-20 Using the Control Panel
Description
Selects the mode: GLlike of LJ4GL2.
Switches between original size and reduced size
printing; also, determines the reduction scale for
reduced size printing. (You can print data created for
the paper size selected in the Scale setting onto the
paper selected in the Page Size setting in the Printing
menu.) OFF, A0, A1, A2, A3.
Sets the origin for the plotter-unit coordinate system to
the lower left corner (Corner) or to the center of the
hard-clip limit (Center).
Selects the color of printed characters; 0 is white (the
background is printed instead of the character) 1 is
black, and 2 through 6 are different colors for color
printers.
Determines the type of line ending: Butt, Square,
Triangular, or Round.
Defines how the ends of lines are joined: Mitered,
Miteredbeveled, Triangular, Round, Beveled, or None.
HP-GL/2 or HP-GL
Pen number, pen width
Center or corner