Onetouch Mode Settings - Epson EPL-N2000 User Manual

OneTouch Mode Settings

The table below lists the options available for each OneTouch
mode setting. Default settings are shown in bold type.
OneTouch mode setting options
Setting
Paper Source
Page Size
Manual Feed
Orientation
RITech
Copies
MP Tray Size
Toner Save
* Not all page sizes are supported by the Duplex Unit or the paper cassettes.
See Appendix A for details on which page sizes are supported by each of
the printer's paper sources.
3-6 Using the Control Panel
Options
Auto
MP (built-in tray)
LC1 (lower cassette 1)
LC2 (lower cassette 2)
A3, A3+, A4, A5, B4, B5,
LT, B, HLT, LGL, GLT,
GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5,
CTM *
On
Off
Portrait
Landscape
Dark
Medium
Light
Off
1 to 999
A3, A3+, A4, A5, B4, B5,
LT, B, HLT, LGL, GLT,
GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5, *
On
Off
Description
Selects the tray to load paper
from; Auto loads from the tray
containing paper that matches
the Page Size setting below
Selects the page size of the
image to be produced
Turns manual feed mode on or
off for the built-in paper tray;
see Chapter 1 for instructions
Selects the print direction on
the page
Sets the RITech (Resolution
Improvement Technology)
setting for your print job; see
Chapter 5 for details
Selects the number of copies to
print
Selects the size of paper
loaded in the built-in paper tray
Sets the amount of toner used
in your print job; for draft
copies, set to On to use
approximately 50% less toner
for a lighter printout