Ps Menu - Epson EPL-N2000 User Manual

GL2 menu items (continued)
Menu item
Pen 0, Pen 1,
Pen 2, Pen 3,
Pen 4, Pen 5,
Pen 6

PS Menu

The PS menu, which is available only when the EPSONScript
Level 2 module is installed, controls two features available in the
PostScript emulation mode. You can also set these features using
the Windows 95 printer driver software; see Chapter 2 for
details.
PS menu items
Menu item
Err Sheet
Protect Level
Description
Selects the line width for the designated pen; you can
select values between 0.05 mm and 5.00 mm, in
increments of 0.05 mm. The default setting for all pens
is 0.35 mm.
Description
Indicates whether the printer prints an EPSONScript error
message. If the option is off, the message is displayed on
the control panel but not printed.
Allows you to increase the amount of memory allocated
for page protection. If the option is off, an overrun error
occurs when the printer doesn't have enough memory to
print a page. If an error occurs, raise the level from 1 up to
5. Raising the protect level decreases printing speed.
Using the Control Panel 3-21