Using The Control Panel Buttons - Epson EPL-N2000 User Manual

The three indicator lights in the center of the control panel give
you the following information:
Continue
Form Feed
On Line

Using the Control Panel Buttons

The control panel has two sets of buttons. You use the buttons in
the top row to choose various OneTouch or SelecType settings,
as explained in the following sections. You use the buttons in the
bottom row as described below:
SelecType
ALT
Flashes when the printer detects an error
or needs maintenance. A message
appears on the display to indicate the
problem. See Chapter 6 for information
about the messages. After you clear the
problem, press the Continue button.
Comes on when the printer receives data.
The light flashes when the printer is
processing the data. If the light stays on,
press the Form Feed button to print the
data and clear the printer's memory.
Indicates that the printer is ready or in
Standby mode. If the light is not on, press
the On Line button.
Press this button to choose a OneTouch
mode or the SelecType mode. Press the
button once to choose OneTouch mode 1.
Press it again to choose OneTouch mode
2. Press the button once more to choose
the SelecType mode. See the following
sections for information about these
modes.
Using the Control Panel 3-3