Epson EPL-N2000 User Manual page 111

Printer Open
The printer cover is open; close it to continue printing.
RAM Check
The printer is checking the RAM; wait a moment for it to finish.
ROM Check
The printer is checking the ROM; wait a moment for it to finish.
Ready
The printer is ready to print.
Reset
The printer's current interface has been reset and the buffer is
cleared. However, other interfaces may still be active and retain
their settings and data.
Reset All
All printer settings for all interfaces have been reset to the
default configuration (the last settings saved).
Reset to Save
You have changed a SelecType setting but the new value is not
activated yet. Do one of the following: (1) exit SelecType by
pressing Continue or On Line (the new setting is activated after
the current print job is finished), or (2) reset the printer by
pressing ALT and Continue at the same time.
Self Test
The printer is performing its internal self test; wait a few
moments for it to finish.
Troubleshooting 6-7