Print Quality Problems - Epson EPL-N2000 User Manual

Print out a status sheet by pressing the Enter button twice after
the printer is warmed up and on line. If the status sheet prints
correctly, check your interface cable connection and software
settings for a solution. If blank pages continue to print, the
problem may be with the printer. Turn off the printer and
contact your authorized EPSON Customer Care Center.
SelecType does not function as expected.
Software programs override SelecType settings, so use your
software settings instead of SelecType whenever possible.
If your settings have been changed by your software, reset
SelecType using the SelecType Init setting on the Setup menu;
see Chapter 3 for details.
You may not have activated new SelecType settings. Press the
Alt and Continue buttons at the same time to reset the printer
and enable the new settings.
The Remote Control Panel utility does not function as
expected.
Software programs override Remote Control Panel settings, so
use your software settings instead of the utility whenever
possible. If your settings have been changed by your software,
reset your printer; see Chapter 3 for details.

Print Quality Problems

This section describes solutions to any problems you may
encounter with the quality of your printout. Many printer driver
settings mentioned here can also be set using SelecType or the
Remote Control Panel utility; if you need to use these utilities
instead of the printer driver, see Chapter 3 or the Technical
Information manual for details.
Troubleshooting 6-17