Epson EPL-N2000 User Manual page 100

10. Now print a page from your application to check the print
quality. If the quality is good, you're finished. If the quality
needs further improvement, go to step 11.
11. Access the printer driver again and click Device Options or
Printer SelecType .
12. Change the Toner Density setting to Dark or Darkest (if the
RITech test pattern was too light) or Light or Lightest (if the
test pattern was too dark).
Note:
If you are using the Windows 3.1 EPSONScript driver, you must
use the control panel to adjust the Density setting; see Chapter 3 for
instructions.
13. Click the OK button.
14. When you see the prompt asking if you want to send your
changes to the printer, select Yes .
15. Exit the printer driver.
16. Print several pages from your application that contains text
and graphics to check the print quality and make sure the
Density setting is not too extreme.
The RITech and Density settings you chose remain in effect even
after you turn off your printer. Remember that the darker your
Density setting the more toner you use, so change the setting
back to Medium if you do not need dark printing later on.
Maintenance 5-7