Epson EPL-N2000 User Manual page 109

Illegal Card
An incompatible PCMCIA card is installed in the printer. You
can either turn off the printer to remove the card, or remove the
card while the printer is on. Press Continue to clear the
message.
Image Optimum
The printer cannot print at the requested quality level because of
insufficient memory. The printer reduces the quality
automatically so that it can continue printing. Check to see if the
printout is acceptable. If not, add more memory (for a
permanent solution) or set Resolution to 300 dpi and Page
Protect to OFF (temporarily). See Chapters 2 and 3 for
instructions.
Manual Feed paper size
Manual feed mode is specified for the current print job. Make
sure the indicated paper size is loaded in the multi-purpose
paper tray; then press On Line .
If you do not want to print in manual feed mode, press
Continue . The printer loads the paper as instructed by the
Paper Source setting. (For details on using manual feed mode,
see "Feeding Envelopes or Paper by Hand" in Chapter 1.)
Mem Overflow
The printer has insufficient memory available for the current
print job. To correct the error, press Continue . If the message
remains, press Alt and Continue simultaneously until Reset All
appears on the control panel display . You can also clear the error
by turning the printer off and back on again.
If you still receive a Mem Overflow error, it may be necessary to
reduce the number or size of fonts, reduce the number or size of
graphics, lower the resolution, or add more memory to the
printer.
Troubleshooting 6-5