Accessing The Printer Driver - Epson EPL-N2000 User Manual

For instructions on installing the printer software for
Windows 3.1 or Windows 95, see the Quick Setup card.
Then follow the instructions in this chapter to access and use the
EPL-N2000 printer driver for printing in the LJ4 Plus (PCL5e)
emulation.
The settings available in the driver software are the same for all
versions of Windows.
Note:
If you installed the optional EPSONScript Level 2 module, you can also
use the EPSONScript driver to print in PostScript mode. See the
documentation that came with your EPSONScript Level 2 module for
instructions.

Accessing the Printer Driver

You can access the printer driver to check or change your print
settings in two ways:
From your Windows application program Print or Print
Setup option
From the Windows 95 Printer Properties utility or the
Windows 3.1 or NT Control Panel.
The way you access the driver determines which programs and
documents the settings will affect. Follow these guidelines:
If you want to change settings for one document only (or for
documents printed with one application only), access the
driver from the application program. The driver settings
return to their defaults after you exit.
2-2 Printing With the Windows Printer Drivers