Setup Menu - Epson WorkForce AL-M300 Series User Manual

c
Important:
Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you
may damage the printer.
T Offset B
Adjusts the vertical printing position on the back of the paper when printing on both sides. Use this if
the printout on the back is not where you expected.
L Offset B
Adjusts the horizontal printing position on the back of the paper when printing on both sides. Use this
if the printout on the back is not where you expected.

Setup Menu

Item
Language
Time Out
MP Mode
Manual Feed
Copies
*1
Duplex
*1
Binding
*1
Start Page
*2
Skip Blank Page
*3
Auto Eject Page
Size Ignore
Auto Cont
*2
Page Protect
A4/LT Auto Switching
Settings (default in bold)
English, Français, Deutsch, Italiano, ESPAÑOL, SVENSKA, Dansk, Nederlands, SUOMI,
Português, Norsk, ,
0, 5 to 60 to 300 in increments of 1
Normal, Last
Off, 1st Page, EachPage
1 to 999
Off, On
Long Edge, Short Edge
Front, Back
Off, On
Off, On
Off, On
Off, On
Auto, On
On, Off
AL-M300/AL-M400 Series
, Türkçe, , ,
Using the Control Panel
User's Guide
70