Table of Contents
Advertisement
Related references
Paper or Media Type Settings - Printing Software
Paper Specifications
Related tasks
Selecting the Paper Settings for Each Source - Control Panel
Loading Paper in the Paper Cassettes and Rear Paper Tray
Aligning the Print Head Using the Product Control Panel
Adjusting the Print Quality Using the Product Control Panel
Solving Print Quality Problems
Check these sections if your printouts have problems with print quality, but your image looks fine on your
computer screen.
Note: When printing using AirPrint, the available print settings are different from those covered in this
manual. See the Apple website for details.
White or Dark Lines in Printout
Blurry or Smeared Printout
Faint Printout or Printout Has Gaps
Grainy Printout
Incorrect Colors
Parent topic:
White or Dark Lines in Printout
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• Make sure the paper type setting matches the type of paper you loaded.
• Make sure you loaded the printable side of the paper correctly for your product.
• Turn off any high speed settings in your product software.
• Align the print head. If print quality does not improve after aligning the print head, disable the
bidirectional (high speed) setting.
• When vertical banding appears or the paper is smeared, clean the paper path.
Solving Problems
254
Advertisement
Table of Contents
