P/N 0539221_T
SHIPPING BRACES
Move the merchandiser as close as possible
to its permanent location and then remove all
packaging. Check for damage before discarding
packaging. Remove all separately packed
accessories such as kits and shelves.
Front Shipping Brace
SHIPPING BLOCK(s)
Shipping block(s) must be removed before
operating cases(s).
Locate and remove the shipping block(s) near
the heat exchanger as shown below.
Shipping
Block
Interior View of Case Bottom
Top View of Merchandiser
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Heat Exchanger
This block was installed to minimize shipping
vibration. Remove the bottom display pans and
air return grilles from the case(s).
EXTERIOR LOADING
Do NOT walk on top of merchandisers or damage to
the merchandisers and serious personal injury could
occur. T
hey are noT sTrucTurally designed To
supporT excessive exTernal loading
weight of a person. Do not store items or flammable
materials atop the case.
MOVING MERCHANDISER THROUGH
NARROW STORE ENTRANCES
Door handles may be disassembled for transit
access through small doors or passage ways. The
minimum door opening for RFLNS & RFMNS
cases is 36 in. x 80 in. The minimum door opening
for RFLTM cases is 44 in. x 87.5 in.
The door handles can be removed for narrow store
entrances.
Remove
Screws from
Door Handle
Freedom Line Reach-in
1-3
such as the