High Beam Indicator Light; Clock; Light Control Switch - Subaru 2002 Legacy Owner's Manual

"Replacing bulbs" section in chapter 11.
J High beam indicator light
This light shows that the headlights are in the high beam mode.
This indicator light also comes on when operating headlight flasher.

Clock

To set the time, turn the setting knob clockwise to advance and counter-
clockwise to retard the time.

Light control switch

WARNING
To prevent battery discharge resulting from accidentally leaving
your lights on when your vehicle is parked, the light switch oper-
ates only when the ignition switch is in the "ON" position. In any
other position, the vehicle's lights will be out.
If you park your vehicle on a roadside at night, use the hazard
warning flasher to alert the other drivers.
Instruments and controls
HB2013BA
– CONTINUED –
3-19